Fiber Media Converter

10/100M Managed IndustrialEthernet Switches --- Pacific Brands Technology Limited

PAC-GY044

Introduction

Thismanaged industrial Ethernet switch is designed to match the critical industrialstandards. With reliable and simple operation against vibration and shock, andwide operation temperature range, it could match a variety of harshenvironments. 

Theswitch complies with CE, FCC and RoHS standards, and passed the 100% burningtest to ensure that it will fulfill the needs of industrial applications. It isa good choice for an economical solution for industrial Ethernet connections.

Features & Benefits

410/100base-T(X) ports and 4 100base-FX ports

“OP-Ring”(recovery time<20ms), RSTP/STP, and MSTP for network redundancy

SNMPv3,ieee802.1X, HTTPS and SSH to enhance network security

Port-basedVLAN, IEEE802.1Q VLAN and GVRP to ease network planning

DHCPOption 82 for IP address assignment with different policies

Ethernet/IPand Modbus/TCP industrial Ethernet protocol supported

Bandwidthmanagement prevents unpredictable network status

RMonfor efficient network monitoring and proactive capability

Lockport allows access by only authorized MAC addresses

Portmirroring for online debugging

Automaticwarning by exception through email, relay output

QoSand ToS/DiffServ for flow control and management

IEEE802.3ad, LACP for optimum bandwidth utilization

Configurableby CLI for advanced management function

-40℃-85℃operating temperature range

Physical Characteristics

Housing:Aluminum Alloy material with IP40 Protection

Dimension:138mm(L) X 112mm(W) X 60mm(H)

Weight:710g

Installation:Din-Rail mounting, Wall mounting

Switch Properties

PriorityQueues: 4

MaximumNo of Available VLANs: 256

VLANID: 1-4094

IGMPGroups: 256

MACTable Size: 8K

PacketBuffer Size: 1M bit

Interfaces

SFPPort: 100base-FX interface

RJ45Port: 10/100base-T(X) auto negotiation

ConsolePort: RS-232(RJ45 connector)

AlarmContact: 1 replay outputs, supports IP/MAC conflict

Power

InputVoltage: 24V DC(18-36VDC) Redundant dual inputs

InputCurrent: <0.5A @24VDC

OverloadCurrent Protection: Present

ReversePolarity Protection: Present

RedundantProtection: Present

Connection:1 removable 6-pin terminal blocks

Environmental Limits

OperatingTemperature: -40℃-85℃

StorageTemperature: -40℃-85℃

AmbientRelative Humidity: 5%-95% (non-condensing)

Technology

Protocol: OP-Ring, IGMPv1/v2, GVRP, SNMPv1/v2C/ v3, DHCP Client, TFTP, SMTP, RMON, HTTP,    

              HTTPS, Telnet, Syslog, SSH, SNMPInform, LLDP, SNTP Service/ Client, PVLAN

MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB,Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB

          Group 1,2,3,9

Flow Control: IEEE 802.3x flowcontrol, back pressure flow control

Standards

IEEE802.3 for 10baseT

IEEE802.3u for 100baseT(X)

IEEE802.3x for Flow Control

IEEE802.1D-2004 for Spanning Tree Protocol

IEEE802.1w for Rapid Spanning Tree Protocol

IEEE802.1Q for VLAN Tagging

IEEE802.1p for Class of Service

IEEE802.1X for Authentication

IEEE 802.3ad for Port Trunk with LACP

EMS:

 EN61000-4-2 (ESD)，Level 3

 EN61000-4-3 (RS)，Level 3

 EN61000-4-4 (EFT)，Level 3

 EN61000-4-5 (Surge)，Level 3

 EN61000-4-6 (CS)，Level 3

 EN61000-4-16(Common-modeConduction)，Level3

Shock: IEC 60068-2-27

Free Fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

EMI: FCC CFR47 Part 15, EN55022/CISPR22, Class A

Industry: IEC61000-6-2

Rail: EN50155, EN50121-4

Traffic: NEMA TS-2

Warranty

5years